If you have bought a printer manufactured by Star Micronics adding it to your AirPOS POS Setup on your Android tablet is now much simpler. In this section you can learn how to connect your printer to an iPad for use with AirPOS.
NB: If your printer connects by Bluetooth you'll need to pair it with your tablet first. If your printer connects to your iPad with an Apple Lightning cable you'll need to connect the cable from the printer to the iPad first.
AirPOS Starter Pro Bundle Setup Guide on Android
The Starter Bundle Hardware includes a cash drawer, receipt printer and secure lockable tablet stand. This bundle is available for both iPad and Android devices.
AirPOS Retail Pro Bundle Setup Guide on Android
The Retail Pro Bundle Hardware includes a cash drawer, receipt printer, Newland Bluetooth barcode scanner and secure lockable tablet stand. This bundle is available for both iPad and Android devices.
Connecting the Star TSP143III LAN Receipt Printer on Android
Star TSP100 Series Network Configuration on Android After you have connected your printer to your router with an ethernet cable the next thing to do is to obtain the IP Address for your printer. Hold down the feed button while you switch the printer on. It will churn out a
How to Setup the Star mPOP All-in-One POS with AirPOS for Android
The Star mPOP is an all in one POS device designed to work with mPOS software such as AirPOS.
Connecting the Star TSP650ii Bluetooth Printer on Android
The first step is to pair the printer with your tablet. Press the home button on your tablet and then locate your Settings icon on the home screen. Select ‘Bluetooth’ and tap on ‘Pair New Device’. At the back of the printer press and hold in the ‘PAIR’ button until
Setting up the Star MC-Print3 Receipt Printer for use with AirPOS on Android
Setting up the Star MC-Print3 Receipt Printer for use with AirPOS on Android
Connecting the Star TSP143IIIU USB Printer with your Android Tablet
Connecting the Star TSP100 USB Printer with your Android Tablet with AirPOS
Adding Logos to Your Receipts for Star Printers on Android and iPad
On an Android device or an iPad you can customise your receipt by adding a logo, a header and a footer. This is done by going into your settings in the left navigation panel of the AirPOS backoffice and uploading a suitable logo through the Reciept Settings dialogue
How to Setup a Star WiFi Power Pack & TP-Link
The WiFi Power Pack is designed to make a Star LAN interface printer wireless. It connects via Ethernet and acts as an adaptor to send/receive the wireless signal from your wireless network.
